Dual Channel Intelligent Optical Fiber Sorting Control
Fiber Amplifier: Two way fiber amplifier inside.
Solenoid Valve Switch Counting: Provide switch counting data for life time evaluation.
Dual Switch Sensor ON/OFF Control: The controller can recognize and adapt to both PNP and NPN type switch sensors.
RS485 Communication: All parameters of the controller can be adjusted via RS485.
Dual Switch Sensor ON/OFF Control: 2 switch sensors or PLCs can be connected to turn the controller on/off.
Automatic Switch Sensor Type Recognition: The controller can recognize and adapt to both PNP and NPN type switch sensors.
Type of Control Output: Push-Pull type with OCP and SCP.
DC Control Output: The controller can output low voltage DC power associated with ON/OFF control of the controller to drive a solenoid or other external devices.
Current Overload Protection: If the working current exceeds the rate value this port will disable to protect the circuit while current returns to normal value.
Restorable Short Circuit Protection: If output of the controller is short-circuited, the controller will shut down its output to protect itself and the load, but the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after powering on.